قالب:Infobox military conflict

Template documentation[view] [edit] [history] [purge]

A military conflict infobox (sometimes referred to as a warbox) may be used to summarize information about a particular military conflict (a battle, campaign, war, or group of related wars) in a standard manner.

Information summarized in an infobox should follow the general guidance for writing a lead section. It should not "make claims" or present material not covered by the article. As with a lead section, there is some discretion in citing information in an infobox. The same guidance should be applied to an infobox as given for citations in a lead section. Information in an infobox must conform with verifiability, point-of-view and other policies.

Information in the infobox should not be "controversial". Refer the reader to an appropriate section in the article or leave the parameter blank rather than make an unsubstantiated or doubtful claim.

Usage

{{{conflict}}}
جزء من {{{partof}}}
[[File:{{{image}}}|{{{image_size}}}|alt={{{alt}}}|upright=1]]
{{{caption}}}
التاريخ{{{date}}}
الموقع
{{{place}}}
{{{coordinates}}}
الفعل{{{action}}}
الوضع {{{status}}}
التغيرات
الإقليمية
{{{territory}}}
{{{combatants_header}}}
{{{combatant1}}} {{{combatant2}}} {{{combatant3}}}
القادة والزعماء
{{{commander1}}} {{{commander2}}} {{{commander3}}}
{{{units_header}}}
{{{units1}}} {{{units2}}} {{{units3}}}
{{{strengths_header}}}
{{{strength1}}} {{{strength2}}} {{{strength3}}}
{{{polstrengths_header}}}
{{{polstrength1}}} {{{polstrength2}}} {{{polstrength3}}}
{{{milstrengths_header}}}
{{{milstrength1}}} {{{milstrength2}}} {{{milstrength3}}}
{{{casualties_header}}}
{{{casualties1}}} {{{casualties2}}} {{{casualties3}}}
{{{notes}}}

The infobox should be added using the {{infobox military conflict}} template, as shown below:

{{Infobox military conflict
| conflict    = 
| width       = 
| partof      = 
| image       = 
| image_size  =
| image_upright =
| alt         =
| caption     = 
| date        = 
| place       = 
| coordinates = <!--Use the {{coord}} template -->
| map_type    = 
| map_relief  = 
| map_size    = 
| map_marksize = 
| map_caption = 
| map_label   = 
| mapframe = <!-- See [[#Mapframe maps]] for more information -->
| territory   = 
| result      = 
| status      = 
| combatants_header = 
| combatant1  = 
| combatant2  = 
| combatant3  = 
| commander1  = 
| commander2  = 
| commander3  = 
| units1      = 
| units2      = 
| units3      = 
| strength1   = 
| strength2   = 
| strength3   = 
| casualties1 = 
| casualties2 = 
| casualties3 = 
| notes       = 
| campaignbox = 
}}

Note: When using parameters, avoid the ambiguous abbreviation "N/A", and instead use "unknown" or "none". All subjective or qualitative judgements and numerical quantities or statistics must be cited to a reliable source (see WP:MILMOS#CITE).

Parameters

  • conflict – the name of the conflict being described (e.g. "Battle of Lützen" or "World War I").
  • widthoptional – the width of the infobox, e.g. "400px"; defaults to: "315px".
  • partofoptional – the larger conflict containing the event described in the article. For battles or campaigns, this should be the war during which the event takes place; for particularly large wars, this may include a theatre (e.g. "the Eastern Front of World War II"). For wars, the parameter may be used to link to a larger group of wars (e.g. the Italian War of 1521–26 to the Italian Wars). It may be necessary to insert "the" before the name of the war for proper grammar.
  • imageoptional – an image for the warbox. Given in the form Example.jpg
  • image_sizeoptional – a size for the image
  • image_uprightoptional – a scaling factor for the image to enlarge or reduce it
  • captionoptional – the text to be placed below the image.
  • dateoptional – the date of the conflict described. Convention is to give the actual date for battles and the years for wars, but this does not always apply.
  • place – the location of the conflict. For conflicts covering a wide area, a general description (e.g. "France", or "Europe", or "Worldwide") may be used.
  • coordinatesoptional – the location of the structure, given as a coordinate pair by using {{coord}} with display=inline,title. Used to display the geographic location of the conflict and the location on a map added with the map_type parameter.
  • map_typeoptional – the base map to be used for the location map, e.g. "Scotland"; see {{location map}} for more details.
  • map_reliefoptional – "yes" if the location map is a relief map; see {{location map}} for more details.
  • map_sizeoptional – width of the location map in pixels (px), e.g. "150"; defaults to: "220".
  • map_markoptional – the name of a file to use as the location map marker, e.g. Green_pog.svg; defaults to: "Red_pog.svg".
  • map_marksizeoptional – width of the location map marker in pixels (px), e.g. "10"; defaults to: "8".
  • map_captionoptional – caption displayed below the location map; defaults to "Location within {{{map_type}}}", e.g. "Location within Scotland".
  • map_labeloptional – the label placed next to the marker on the location map.
  • mapframeoptional – Show a {{Infobox mapframe}}. See #Mapframe maps for more information.
  • territoryoptional – any changes in territorial control as a result of the conflict; this should not be used for overly lengthy descriptions of the peace settlement.
  • actionoptional – In case of Coup d'État, short description of modus operandi, e.g. "...marched over the city...", "...dissolving the Congress of the Republic...", "...take the government hostage ...", "...put the country under military control ...", etc.
  • resultoptional – this parameter may use one of two standard terms: "X victory" or "Inconclusive". The term used is for the "immediate" outcome of the "subject" conflict and should reflect what the sources say. In cases where the standard terms do not accurately describe the outcome, a link or note should be made to the section of the article where the result is discussed in detail (such as "See the Aftermath section"). Such a note can also be used in conjunction with the standard terms but should not be used to conceal an ambiguity in the "immediate" result. Do not introduce non-standard terms like "decisive", "marginal" or "tactical", or contradictory statements like "decisive tactical victory but strategic defeat". Omit this parameter altogether rather than engage in speculation about which side won or by how much.
  • statusoptional – for ongoing conflicts, the current status of the conflict. This should not be used if a final result (above) is provided.
  • combatants_headeroptional – sets the header text for the combatants section. Default is "Belligerents". In case of Coup d'État, use "Government-Insurgents".
  • combatant1/combatant2/combatant3optional – the parties participating in the conflict. This is most commonly the countries whose forces took part in the conflict; however, larger groups (such as alliances or international organizations) or smaller ones (such as particular units, formations, or groups) may be indicated if doing so improves reader understanding. When there is a large number of participants, it may be better to list only the three or four major groups on each side of the conflict, and to describe the rest in the body of the article. The combatant3 field may be used if a conflict has three distinct "sides", and should be left blank on other articles. Combatants should be listed in order of importance to the conflict, be it in terms of military contribution, political clout, or a recognized chain of command. If differing metrics can support alternative lists, then ordering is left to the editors of the particular article. The practice of writing in a "Supported by" subheading is deprecated (see discussion).
    • combatant1a/combatant2a/combatant3aoptional – in cases where the parties significantly changed over the course of the conflict, these subsidiary fields may be used to provide additional rows for the combatantN fields (above).
    • combatant1b/combatant2b/combatant3boptional – additional row, as above.
    • combatant1c/combatant2c/combatant3coptional – additional row, as above.
    • combatant1d/combatant2d/combatant3doptional – additional row, as above.
    • combatant1e/combatant2e/combatant3eoptional – additional row, as above.
  • commander1/commander2/commander3optional – the commanders of the military forces involved. For battles, this should include military commanders (and other officers as necessary). For wars, only prominent or notable leaders should be listed, with an upper limit of about seven per combatant column recommended. Ranks and position titles should be omitted. The {{KIA}} and {{POW}} templates may be included immediately after the names of commanders who were killed in action or surrendered and were taken prisoner, respectively. The commander3 field can only be used if the combatant3 field is set.
    • commander1a/commander2a/commander3aoptional – in cases where the commanders significantly changed over the course of the conflict, these subsidiary fields may be used to provide additional rows for the commanderN fields (above).
    • commander1b/commander2b/commander3boptional – additional row, as above.
    • commander1c/commander2c/commander3coptional – additional row, as above.
    • commander1d/commander2d/commander3doptional – additional row, as above.
    • commander1e/commander2e/commander3eoptional – additional row, as above.
  • units1/units2/units3optional – the units or formations involved. If a large number of distinct formations is present, it may be better to reference an order of battle in the body of the article than to include the entire list in this field. The units3 field can only be used if the combatant3 field is set.
  • strength1/strength2optional – the numerical strength of the units involved.
  • polstrength1/polstrength2optional – In case of Coup d'Etat, political organizations that supported the government (1) respective the insurgents (2).
  • milstrength1/milstrength2optional – In case of Coup d'Etat, military units that supported the government (1) respective the insurgents (2).
  • strength3optional – if combatant3 is set, this is a third strength field identical to the two above; if it is not set, this is an alternate combined field for use where only the total participation in a conflict is known.
  • casualties1/casualties2optionalcasualties suffered (including: dead, wounded, missing, captured and civilian deaths) and equipment losses. Note that this section of the infobox is headed "Casualties and losses". Terms such as "dead" (or "killed"), "wounded", or "captured" should be used in place of abbreviations such as "KIA" or "POW". Where equipment losses are reported, this should be confined to major or significant types of equipment broadly categorized such as: tanks, guns (artillery pieces), aircraft, destroyers etc.
  • casualties3optional – if combatant3 is set, this is a third casualty field identical to the two above; if it is not set, this is an alternate combined field for use where only the total casualties of a conflict are known, or where civilian casualties cannot be directly attributed to either side.
  • notesoptional – optional field for further notes; this should only be used in exceptional circumstances.
  • campaignboxoptional – optional field for appending a campaignbox template to the bottom of the infobox, which allows both boxes to float as a single element (useful if there are subsequent left floating images, which would otherwise not be able to float above the campaign box); the template must be specified in the format {{Campaignbox XYZ}}.

See also: {{Campaignbox/doc}}

Mapframe maps

  • Basic parameters:
    • mapframe – Specify yes or no to show or hide the map, overriding the default. Default: no
    • mapframe-caption – Caption for the map. Default: blank (or if |mapframe-geomask= is set, "Location in geomask's label")
    • mapframe-custom – Use a custom map instead of the automatic mapframe. Specify either a {{maplink}} template, or another template that generates a mapframe map, or an image name. If used, the subsequent mapframe parameters will be ignored. Default: not specified
    • mapframe-id or id or qid – Id (Q-number) of Wikidata item to use. Default: item for current page
    • mapframe-coordinates or mapframe-coord or coordinates or coord – Coordinates to use, instead of any on Wikidata. Use the {{Coord}} template, e.g. |coord={{Coord|12.34|N|56.78|E}}. Default: coordinates from Wikidata
    • mapframe-wikidata – Set to yes to show shape/line features from the wikidata item, if any, when |coord= is set. Default: not specified
  • Customise which features are displayed:
    • mapframe-shape – Turn off display of shape feature by setting to none. Use an inverse shape (geomask) instead of a regular shape by setting to inverse. Default: not specified
    • mapframe-point – Turn off display of point feature by setting to none. Force point marker to be displayed by setting to on. Default: not specified
    • mapframe-line – Turn off display of line feature by setting to none. Default: not specified
    • mapframe-geomask – Wikidata item to use as a geomask (everything outside the boundary is shaded darker). Can either be a specific Wikidata item (Q-number), or a property that specifies the item to use (e.g. P17 for [خطأ: الوظيفة "wdurl" غير موجودة. country (P17)], P131 for [خطأ: الوظيفة "wdurl" غير موجودة. located in the administrative territorial entity (P131)]). Default: not specified
    • mapframe-switcher – set to auto or geomasks or zooms to enable Template:Switcher-style switching between multiple mapframes. Default: not specified
      • auto – switch geomasks found in [خطأ: الوظيفة "wdurl" غير موجودة. location (P276)] and [خطأ: الوظيفة "wdurl" غير موجودة. located in the administrative territorial entity (P131)] statements on the page's Wikidata item, searching recursively. E.g. an item's city, that city's state, and that state's country.
      • geomasks – switch between the geomasks specified as a comma-separated list of Wikidata items (Q-numbers) in the mapframe-geomask parameter
      • zooms – switch between "zoomed in"/"zoomed midway"/"zoomed out", where "zoomed in" is the default zoom (with a minimum of 3), "zoomed out" is 1, and "zoomed midway" is the average
  • Other optional parameters:
    • mapframe-frame-width or mapframe-width – Frame width. Default: 270
    • mapframe-frame-height or mapframe-height – Frame height. Default: 200
    • mapframe-shape-fill – Color used to fill shape features. Default: #606060
    • mapframe-shape-fill-opacity – Opacity level of shape fill, a number between 0 and 1. Default: 0.5
    • mapframe-stroke-color or mapframe-stroke-colour – Color of line features, and outlines of shape features. Default: #ff0000
    • mapframe-stroke-width – Width of line features, and outlines of shape features; default is "5". Default: 5
    • mapframe-marker – Marker symbol to use for coordinates; see mw:Help:Extension:Kartographer/Icons for options. Default: not specified (i.e. blank)
      • Can also be set to blank to override any default marker symbol
    • mapframe-marker-color or mapframe-marker-colour – Background color for the marker. Default: #5E74F3
    • mapframe-geomask-stroke-color or mapframe-geomask-stroke-colour – Color of outline of geomask shape. Default: #555555
    • mapframe-geomask-stroke-width – Width of outline of geomask shape. Default: 2
    • mapframe-geomask-fill – Color used to fill outside geomask features. Default: #606060
    • mapframe-geomask-fill-opacity – Opacity level of fill outside geomask features, a number between 0 and 1. Default: 0.5
    • mapframe-zoom – Set the zoom level, from "1" (map of earth) to "18" (maximum zoom in), to be used if the zoom level cannot be determined automatically from object length or area. Default: 10
    • mapframe-length_km or mapframe-length_mi or mapframe-area_km2 or mapframe-area_mi2 – Determine zoom level by passing in object's length (in kilometres or miles) or area (in square kilometres or square miles). Default: not specified
    • mapframe-frame-coordinates or mapframe-frame-coord – Alternate latitude and longitude coordinates for initial placement of map, using {{coord}}. Default: derived from item coordinates

Example

Battle of Lützen
جزء من the Thirty Years' War
Battle of Lutzen by Carl Whalbom depicting King Gustavus Aolphus falling from a horse mortally wounded in a melee
The Battle of Lützen by Carl Wahlbom shows the death of King Gustavus Adolphus on 16 November 1632.
التاريخ6 November (O.S.) or 16 November (N.S.), 1632
الموقع
Near Lützen, southwest of Leipzig
(present-day Germany)
51°15′N 12°08′E / 51.250°N 12.133°E / 51.250; 12.133
النتيجة Protestant victory
(see Aftermath section)
المتحاربون
السويد Sweden
Protestant Union
 الإمبراطورية الرومانية المقدسة
Catholic League
القادة والزعماء
السويد Gustavus Adolphus 
السويد Dodo von Knyphausen
ناخبية ساكسونيا Bernhard of Saxe-Weimar
السويد Robert Munro, 18th Baron of Foulis
الإمبراطورية الرومانية المقدسة Albrecht von Wallenstein
الإمبراطورية الرومانية المقدسة Heinrich Holk
الإمبراطورية الرومانية المقدسة Count Gottfried zu Pappenheim (ق.م)
القوى
12,800 infantry
6,200 cavalry
60 guns
10,000 infantry
7,000 cavalry, plus 3,000 infantry and 2,000 cavalry on arrival
24 guns
الضحايا والخسائر
3,400 dead and 1,600 wounded or missing Probably about the same as Swedish casualtiesقالب:Fakeref
{{Infobox military conflict
| conflict    = Battle of Lützen
| partof      = the [[Thirty Years' War]]
| image       = Battle of Lutzen.jpg
| alt         = Battle of Lutzen by Carl Whalbom depicting King Gustavus Aolphus falling from a horse mortally wounded in a melee
| image_size   = 300
| caption     = The '' '''Battle of Lützen''' '' by [[Carl Wahlbom]] shows the death of King [[Gustavus Adolphus]] on 16 November 1632.
| date        = 6 November ([[Old Style and New Style dates|O.S.]]) or 16 November ([[Old Style and New Style dates|N.S.]]), 1632
| place       = Near [[Lützen]], southwest of [[Leipzig]]<br />(present-day [[Germany]])
| coordinates = {{coord|51|15|N|12|08|E|region:DE_type:city}}
| result      = Protestant victory <br />(see {{blue|Aftermath}} section)
| combatant1  = {{flag icon|Sweden|1562}} [[Swedish Empire|Sweden]]<br />[[Protestant Union]]
| combatant2  = {{flag|Holy Roman Empire}}<br/>{{flagicon image|Catholic League (Germany).svg}} [[Catholic League (German)|Catholic League]]
| commander1  = {{flag icon|Sweden|1562}} [[Gustavus Adolphus]]{{KIA}}<br/>{{flag icon|Sweden|1562}} [[Dodo zu Innhausen und Knyphausen|Dodo von Knyphausen]]<br/>{{flag icon|Electorate of Saxony}} [[Bernhard of Saxe-Weimar]]<br/>{{flag icon|Sweden|1562}} [[Robert Munro, 18th Baron of Foulis]]
| commander2  = {{flag icon|Holy Roman Empire}} [[Albrecht von Wallenstein]]<br/>{{flag icon|Holy Roman Empire}} [[Heinrich Holk]]<br/>{{flag icon|Holy Roman Empire}} [[Gottfried zu Pappenheim|Count Gottfried zu Pappenheim]]{{DOW}}
| strength1   = 12,800 infantry<br />6,200 cavalry<br />60 guns
| strength2   = 10,000 infantry<br />7,000 cavalry, plus 3,000 infantry and 2,000 cavalry on arrival<br />24 guns
| casualties1 = 3,400 dead and 1,600 wounded or missing
| casualties2 = Probably about the same as Swedish casualties{{fakeref|1}}
}}

Microformat

The HTML mark up produced by this template includes an hCalendar microformat, which makes the event details parsable by computers, either acting automatically to catalogue article across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to a calendar or diary applciation. Within the hCalendar is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.

Dates will only appear if you use {{Start date}} or {{End date}} (use the former for single dates).

hCalendar uses HTML classes including:

  • "dtend"
  • "dtstart"
  • "location"
  • "summary"
  • "vevent"

Geo is produced by calling {{coord}}, and uses HTML classes:

  • "geo"
  • "latitude"
  • "longitude"

Please do not rename or remove these classes.

When giving coordinates, please don't be overly precise.

Tracking category

TemplateData

This is the بيانات القالب documentation for this template used by المحرر المرئي وأدوات أخرى.

See the monthly error report for this template.

TemplateData for Infobox military conflict

TemplateData

Summarize information about a particular military conflict (a battle, campaign, war, or group of related wars).

وسائط القالب

هذا القالب له تهيئة مخصصة.

وسيطوصفنوعحالة
Conflictconflict

The name of the conflict being described.

سطرمطلوب
Widthwidth

Width of the infobox.

غيابي
315px
نصاختياري
Part ofpartof

The larger conflict containing the event described in the article.

اسم الصفحةاختياري
Imageimage

An image for the warbox given in the form Example.jpg.

ملفاختياري
Image sizeimage_size

The size of the image

نصاختياري
Image uprightimage_upright

A scaling factor for the image

نصاختياري
Altalt

Alternative textual description of the image

نصاختياري
Captioncaption

The text to be placed below the image.

نصاختياري
Datedate

The date of the conflict described. Convention is to give the actual date for battles and the years for wars, but this does not always apply.

نصاختياري
Placeplace

The location of the conflict.

نصمطلوب
Coordinatescoordinates

The location of the structure, given as a coordinate pair by using {{coord}} with display=inline,title.

نصاختياري
Map Typemap_type

The base map to be used for the location map, e.g. "Scotland"; see {{location map}} for more details.

نصاختياري
Map Reliefmap_relief

"yes" if the location map is a relief map.

نصاختياري
Map Sizemap_size

Width of the location map in pixels (px).

غيابي
220
رقماختياري
Map Markermap_mark

File to use as the location map marker.

غيابي
red_pog.svg
نصاختياري
Map Marker Sizemap_marksize

Width of the location map marker in pixels (px).

غيابي
8
رقماختياري
Map Captionmap_caption

Caption displayed below the location map.

غيابي
Location within {{{map_type}}}
نصاختياري
Map Labelmap_label

The label placed next to the marker on the location map.

سطراختياري
Territoryterritory

Any changes in territorial control as a result of the conflict; this should not be used for overly lengthy descriptions of the peace settlement.

نصاختياري
Resultresult

This parameter may use one of two standard terms: "X victory" or "Inconclusive". The term used is for the "immediate" outcome of the "subject" conflict and should reflect what the sources say. In cases where the standard terms do not accurately describe the outcome, a link or note should be made to the section of the article where the result is discussed in detail (such as "See the Aftermath section"). Such a note can also be used in conjunction with the standard terms but should not be used to conceal an ambiguity in the "immediate" result. Do not introduce non-standard terms like "decisive", "marginal" or "tactical", or contradictory statements like "decisive tactical victory but strategic defeat". Omit this parameter altogether rather than engage in speculation about which side won or by how much.

نصاختياري
Statusstatus

For ongoing conflicts, the current status of the conflict.

سطراختياري
combatants_headercombatants_header

دون وصف

غير معروفاختياري
Combatant 1combatant1

A party participating in the conflict.

نصاختياري
Combatant 2combatant2

A party participating in the conflict.

نصاختياري
Combatant 3combatant3

A party participating in the conflict. (only if the conflict has three distinct "sides")

نصاختياري
Combatant 1acombatant1a

In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 1 field.

نصاختياري
Combatant 2acombatant2a

In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 2 field.

نصاختياري
Combatant 3acombatant3a

In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 3 field.

نصاختياري
Combatant 1bcombatant1b

In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 1 field.

نصاختياري
Combatant 2bcombatant2b

In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 2 field.

نصاختياري
Combatant 3bcombatant3b

In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 3 field.

نصاختياري
Combatant 1ccombatant1c

In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 1 field.

نصاختياري
Combatant 2ccombatant2c

In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 2 field.

نصاختياري
Combatant 3ccombatant3c

In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 3 field.

نصاختياري
Combatant 1dcombatant1d

In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 1 field.

نصاختياري
Combatant 2dcombatant2d

In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 2 field.

نصاختياري
Combatant 3dcombatant3d

In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 3 field.

نصاختياري
Commander of Combatant 1commander1

The commanders of the military forces of Combatant (1) involved.

نصاختياري
Commander of Combatant 2commander2

The commanders of the military forces of Combatant 2 involved.

نصاختياري
Commander of Combatant 3commander3

The commanders of the military forces of Combatant 3 involved.

نصاختياري
Units of Combatant 1units1

The units or formations of Combatant 1 involved. If a large number of distinct formations is present, it may be better to reference an order of battle in the body of the article than to include the entire list in this field.

نصاختياري
Units of Combatant 2units2

The units or formations of Combatant 2 involved. If a large number of distinct formations is present, it may be better to reference an order of battle in the body of the article than to include the entire list in this field.

نصاختياري
Units of Combatant 3units3

The units or formations of Combatant 3 involved. If a large number of distinct formations is present, it may be better to reference an order of battle in the body of the article than to include the entire list in this field.

نصاختياري
Strength of Combatant 1strength1

The numerical strength of Combatant 1.

نصاختياري
Strength of Combatant 2strength2

The numerical strength of Combatant 2.

نصاختياري
Strength of Combatant 3strength3

If Combatant 3 is set, this field is for the numerical strength of Combatant 3. If Combatant 3 is not set, this is an alternate combined field for use where only the total participation in a conflict is known.

نصاختياري
Casualties of Combatant 1casualties1

Casualties suffered by Combatant 1 (including: dead, wounded, missing, captured and civilian deaths) and equipment losses. Terms such as "dead" (or "killed"), "wounded", or "captured" should be used in place of abbreviations such as "KIA" or "POW". Where equipment losses are reported, this should be confined to major or significant types of equipment broadly categorized such as: tanks, guns (artillery pieces), aircraft, destroyers etc.

نصاختياري
Casualties of Combatant 2casualties2

Casualties suffered by Combatant 2 (including: dead, wounded, missing, captured and civilian deaths) and equipment losses. Terms such as "dead" (or "killed"), "wounded", or "captured" should be used in place of abbreviations such as "KIA" or "POW". Where equipment losses are reported, this should be confined to major or significant types of equipment broadly categorized such as: tanks, guns (artillery pieces), aircraft, destroyers etc.

نصاختياري
Casualties of Combatant 3casualties3

If Combatant 3 is set, this field is for the casualties suffered by Combatant 3, (including: dead, wounded, missing, captured and civilian deaths) and equipment losses. Terms such as "dead" (or "killed"), "wounded", or "captured" should be used in place of abbreviations such as "KIA" or "POW". Where equipment losses are reported, this should be confined to major or significant types of equipment broadly categorized such as: tanks, guns (artillery pieces), aircraft, destroyers etc. If combatant3 is not set, this is an alternate combined field for use where only the total casualties of a conflict are known, or where civilian casualties cannot be directly attributed to either side.

نصاختياري
Notesnotes

Optional field for further notes; this should only be used in exceptional circumstances.

نصاختياري
Campaignboxcampaignbox

Optional field for appending a campaignbox template to the bottom of the infobox, which allows both boxes to float as a single element (useful if there are subsequent left floating images, which would otherwise not be able to float above the campaign box); the template must be specified in the format {{Campaignbox XYZ}}.

نصاختياري
Show mapframe mapmapframe

Specify yes or no to show or hide the map, overriding the default

غيابي
no
مثال
yes
نصمقترح
Mapframe captionmapframe-caption

Caption for the map. If mapframe-geomask is set, then the default is "Location in <<geomask's label>>"

نصاختياري
Custom mapframemapframe-custom

Use a custom map instead of the automatic mapframe. Specify either a {{maplink}} template, or another template that generates a mapframe map, or an image name. If used, other mapframe parameters will be ignored.

قالباختياري
Mapframe Wikidata itemmapframe-id id qid

Id (Q-number) of Wikidata item to use.

غيابي
(item for current page)
نصاختياري
Mapframe coordinates mapframe-coordinates mapframe-coord coordinates coord

Coordinates to use, instead of any on Wikidata. Use the {{Coord}} template.

غيابي
(coordinates from Wikidata)
مثال
{{Coord|12.34|N|56.78|E}}
قالباختياري
Mapframe shapes from Wikidatamapframe-wikidata

et to yes to show shape/line features from the wikidata item, if any, when coordinates are specified by parameter

مثال
yes
نصاختياري
Mapframe shape featuremapframe-shape

Override display of mapframe shape feature. Turn off by setting to "none". Use an inverse shape (geomask) instead of a regular shape by setting to "inverse"

نصاختياري
Mapframe point featuremapframe-point

Override display of mapframe point feature. Turn off display of point feature by setting to "none". Force point marker to be displayed by setting to "on"

نصاختياري
Mapframe geomaskmapframe-geomask

Wikidata item to use as a geomask (everything outside the boundary is shaded darker). Can either be a specific Wikidata item (Q-number), or a property that specifies the item to use (e.g. P17 for country, or P131 for located in the administrative territorial entity)

مثال
Q100
اسم الصفحةاختياري
Mapframe switchermapframe-switcher

Set to "auto" or "geomasks" or "zooms" to enable Template:Switcher-style switching between multiple mapframes. IF SET TO auto – switch geomasks found in location (P276) and located in the administrative territorial entity (P131) statements on the page's Wikidata item, searching recursively. E.g. an item's city, that city's state, and that state's country. IF SET TO geomasks – switch between the geomasks specified as a comma-separated list of Wikidata items (Q-numbers) in the mapframe-geomask parameter. IF SET TO zooms – switch between "zoomed in"/"zoomed midway"/"zoomed out", where "zoomed in" is the default zoom (with a minimum of 3), "zoomed out" is 1, and "zoomed midway" is the average.

نصاختياري
Mapframe widthmapframe-frame-width mapframe-width

Frame width in pixels

غيابي
270
رقماختياري
Mapframe heightmapframe-frame-height mapframe-height

Frame height in pixels

غيابي
200
رقماختياري
Mapframe shape fillmapframe-shape-fill

Color used to fill shape features

غيابي
#606060
نصاختياري
Mapframe shape fill opacitymapframe-shape-fill-opacity

Opacity level of shape fill, a number between 0 and 1

غيابي
0.1
رقماختياري
Mapframe stroke colormapframe-stroke-color mapframe-stroke-colour

Color of line features, and outlines of shape features

غيابي
#ff0000
نصاختياري
Mapframe stroke widthmapframe-stroke-width

Width of line features, and outlines of shape features

غيابي
2
رقماختياري
Mapframe markermapframe-marker

Marker symbol to use for coordinates; see [[mw:Help:Extension:Kartographer/Icons]] for options

مثال
museum
نصاختياري
Mapframe marker colormapframe-marker-color mapframe-marker-colour

Background color for the marker

غيابي
#5E74F3
نصاختياري
Mapframe geomask stroke colormapframe-geomask-stroke-color mapframe-geomask-stroke-colour

Color of outline of geomask shape

غيابي
#555555
نصاختياري
Mapframe geomask stroke widthmapframe-geomask-stroke-width

Width of outline of geomask shape

غيابي
1
رقماختياري
Mapframe geomask fillmapframe-geomask-fill

Color used to fill outside geomask features

غيابي
#606060
نصاختياري
Mapframe geomask fill opacitymapframe-geomask-fill-opacity

Opacity level of fill outside geomask features, a number between 0 and 1

غيابي
0.25
رقماختياري
Mapframe zoommapframe-zoom

Set the zoom level, from "1" to "18", to used if the zoom level cannot be determined automatically from object length or area. NB: default may also be set by Kartographer automatically based on the features rendered.

غيابي
10
مثال
12
رقماختياري
Mapframe length (km)mapframe-length_km

Object length in kilometres, for automatically determining zoom level. ONLY use ONE of the available parameters for length or area

رقماختياري
Mapframe length (mi)mapframe-length_mi

Object length in miles, for automatically determining zoom level. ONLY use ONE of the available parameters for length or area

رقماختياري
Mapframe area (km^2)mapframe-area_km2

Object arean square kilometres, for automatically determining zoom level. ONLY use ONE of the available parameters for length or area

رقماختياري
Mapframe area (mi^2)mapframe-area_mi2

Object area in square miles, for automatically determining zoom level. ONLY use ONE of the available parameters for length or area

رقماختياري
Mapframe frame coordinatesmapframe-frame-coordinates mapframe-frame-coord

Alternate latitude and longitude coordinates for initial placement of map, using {{coord}}

مثال
{{Coord|12.35|N|56.71|E}}
قالباختياري
Mapframe line featuremapframe-line

Turn off display of line feature by setting to none. Force display of line by setting to on.

نصاختياري
Mapframe typemapframe-type

Type of the object rendered in the mapframe, like with {{coord}}.

نصاختياري
Mapframe line stroke colormapframe-line-stroke-color mapframe-line-stroke-colour

Color of line features

غيابي
#ff0000
نصاختياري
Mapframe line stroke widthmapframe-line-stroke-width

Width of line features

غيابي
5
رقماختياري
Mapframe shape stroke colormapframe-shape-stroke-color mapframe-shape-stroke-colour

Color of outlines of shape features

غيابي
#ff0000
نصاختياري
Mapframe shape stroke widthmapframe-shape-stroke-width

Width of outlines of shape features

غيابي
2
رقماختياري
units4units4

دون وصف

غير معروفاختياري
units5units5

دون وصف

غير معروفاختياري
units6units6

دون وصف

غير معروفاختياري
casualties4casualties4

دون وصف

غير معروفاختياري
casualties5casualties5

دون وصف

غير معروفاختياري
casualties6casualties6

دون وصف

غير معروفاختياري
commander4commander4

دون وصف

غير معروفاختياري
commander5commander5

دون وصف

غير معروفاختياري
commander6commander6

دون وصف

غير معروفاختياري
strength4strength4

دون وصف

غير معروفاختياري
strength5strength5

دون وصف

غير معروفاختياري
strength6strength6

دون وصف

غير معروفاختياري
combatant4combatant4

دون وصف

غير معروفاختياري
combatant4acombatant4a

دون وصف

غير معروفاختياري
combatant4bcombatant4b

دون وصف

غير معروفاختياري
combatant4ccombatant4c

دون وصف

غير معروفاختياري
combatant4dcombatant4d

دون وصف

غير معروفاختياري
combatant5combatant5

دون وصف

غير معروفاختياري
combatant5acombatant5a

دون وصف

غير معروفاختياري
combatant5bcombatant5b

دون وصف

غير معروفاختياري
combatant5ccombatant5c

دون وصف

غير معروفاختياري
combatant5dcombatant5d

دون وصف

غير معروفاختياري
combatant6combatant6

دون وصف

غير معروفاختياري
combatant6acombatant6a

دون وصف

غير معروفاختياري
combatant6bcombatant6b

دون وصف

غير معروفاختياري
combatant6ccombatant6c

دون وصف

غير معروفاختياري
combatant6dcombatant6d

دون وصف

غير معروفاختياري
polstrength1polstrength1

دون وصف

غير معروفاختياري
polstrength2polstrength2

دون وصف

غير معروفاختياري
polstrength3polstrength3

دون وصف

غير معروفاختياري
polstrength4polstrength4

دون وصف

غير معروفاختياري
polstrength5polstrength5

دون وصف

غير معروفاختياري
polstrength6polstrength6

دون وصف

غير معروفاختياري
milstrength1milstrength1

دون وصف

غير معروفاختياري
milstrength2milstrength2

دون وصف

غير معروفاختياري
milstrength3milstrength3

دون وصف

غير معروفاختياري
milstrength4milstrength4

دون وصف

غير معروفاختياري
milstrength5milstrength5

دون وصف

غير معروفاختياري
milstrength6milstrength6

دون وصف

غير معروفاختياري
units_headerunits_header

دون وصف

غير معروفاختياري
strengths_headerstrengths_header

دون وصف

غير معروفاختياري
polstrengths_headerpolstrengths_header

دون وصف

غير معروفاختياري
milstrengths_headermilstrengths_header

دون وصف

غير معروفاختياري
casualties_headercasualties_header

دون وصف

غير معروفاختياري
actionaction

دون وصف

غير معروفاختياري
map_altmap_alt

دون وصف

غير معروفاختياري

See also